debian:~# smartctl -a -F samsung /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG SP4002H Serial Number: 0411J1FT836834 Firmware Version: QU100-60 User Capacity: 40.060.403.712 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1 Local Time is: Tue Jul 28 07:57:04 2009 CEST ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1800) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 40 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 4788606 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 194 Temperature_Celsius 0x0022 148 139 000 Old_age Always - 30 197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail Offline - 0 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 93 200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always - 0 201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always - 5 SMART Error Log Version: 1 Warning: ATA error count 552 inconsistent with error log pointer 5 ATA Error Count: 552 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 552 occurred at disk power-on lifetime: 39898 hours (1662 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 50 bd a8 e0 Error: ICRC, ABRT at LBA = 0x00a8bd50 = 11058512 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 50 bd a8 e0 00 49d+16:46:36.296 READ DMA c8 00 a0 b0 bd a7 e0 00 49d+16:46:36.296 READ DMA c8 00 68 48 bd a7 e0 00 49d+16:46:36.296 READ DMA c8 00 98 b0 bd a6 e0 00 49d+16:46:36.296 READ DMA c8 00 00 b0 bd a5 e0 00 49d+16:46:36.296 READ DMA Error 551 occurred at disk power-on lifetime: 39898 hours (1662 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 30 78 a3 f4 e0 Error: ICRC, ABRT 48 sectors at LBA = 0x00f4a378 = 16032632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 30 78 a3 f4 e0 00 49d+16:44:16.296 READ DMA c8 00 d0 a8 a3 f3 e0 00 49d+16:44:16.296 READ DMA c8 00 18 60 90 1c e0 00 49d+16:44:16.296 READ DMA c8 00 70 e8 90 1b e0 00 49d+16:44:16.296 READ DMA c8 00 10 a0 90 19 e0 00 49d+16:44:16.296 READ DMA Error 550 occurred at disk power-on lifetime: 39530 hours (1647 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 b8 48 7b df e0 Error: ICRC, ABRT 184 sectors at LBA = 0x00df7b48 = 14646088 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 b8 48 7b df e0 00 06:35:20.000 READ DMA c8 00 00 48 7b de e0 00 06:35:20.000 READ DMA c8 00 00 48 7b dd e0 00 06:35:20.000 READ DMA c8 00 00 48 7b dc e0 00 06:35:20.000 READ DMA c8 00 08 40 7b dc e0 00 06:35:20.000 READ DMA Error 549 occurred at disk power-on lifetime: 39376 hours (1640 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 e0 7b cf e0 Error: ICRC, ABRT at LBA = 0x00cf7be0 = 13597664 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 e0 7b cf e0 00 05:32:45.000 READ DMA c8 00 00 e0 7b ce e0 00 05:32:45.000 READ DMA c8 00 00 e0 7b cd e0 00 05:32:45.000 READ DMA c8 00 08 d8 7b cd e0 00 05:32:45.000 READ DMA c8 00 00 08 7b e2 e0 00 05:32:45.000 READ DMA Error 548 occurred at disk power-on lifetime: 39128 hours (1630 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 18 48 aa 77 e1 Error: ICRC, ABRT 24 sectors at LBA = 0x0177aa48 = 24619592 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 48 aa 77 e1 00 49d+12:58:38.296 READ DMA c8 00 48 00 aa 77 e1 00 49d+12:58:38.296 READ DMA c8 00 20 00 43 56 e1 00 49d+12:58:38.296 READ DMA c8 00 10 b8 43 55 e1 00 49d+12:58:38.296 READ DMA c8 00 10 f0 aa 76 e1 00 49d+12:58:38.296 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging